The Aiper Surfer S2 has landed — and for pool owners across Australia, especially here on the sunny Gold Coast, it feels like a genuine game changer. With stronger suction, smarter navigation, solar-powered automation, and app-powered control, this new model promises to deliver a cleaner pool with almost zero effort from the owner.

Having tested the Aiper Surfer S1 last year, the S2 immediately feels like a major leap forward. Whether your pool collects leaves, dust, pollen, or bugs (especially in coastal and tree-filled suburbs), the Surfer S2 runs automatically all day — even when you're not home — keeping the water surface spotless.

01Watch the Full Review

02Unboxing & Modernised Design

Right out of the box, the Aiper Surfer S2 shows major refinements compared to the S1. The shell feels sturdier, the frame is sleeker, and overall it looks more polished and premium. Inside the box you get the Surfer S2 skimmer, a DC charger, the user manual, and an orange foam noodle (important for installation).

The foam noodle is meant to sit inside the skimmer port — not the basket — and helps maintain proper buoyancy. The entire device weighs just 5.7kg, making it extremely easy to lift in and out of the pool.

Design-wise, Aiper has kept the low-profile, quiet-gliding shape, but added new sensors, a better basket, and a more efficient engine layout. The solar panel on top is larger and more efficient, enabling longer operation and faster recharging.

Click the photo below to buy the Aiper Surfer S2 on Amazon:

03Setup, Wi-Fi Pairing & App Features

Setup is simple and takes only a couple of minutes: give it a quick charge or drop it straight into the pool, hold the power button until the Wi-Fi light activates, connect through the Aiper mobile app, remove the foam noodle from the basket and install it correctly, and place the included anti-stranding stoppers if your pool has steps or ledges.

Once connected, the Aiper app becomes a full command centre:

One of the most impressive features is remote piloting. If you spot debris in one corner, simply nudge the Surfer S2 over using the onscreen joystick and clean exactly where needed.

04Real-World Performance: Solar, Suction & Smart Navigation

Solar Seeker Technology

The Surfer S2 uses upgraded Solar Seeker technology. When the battery gets low, the S2 intelligently moves toward the brightest part of the pool to recharge. After approximately 15 minutes, it automatically resumes cleaning. In real-world testing here on the Gold Coast, the S2 ran for two full days without needing a manual charge — even during cloudy conditions.

Quiet, Efficient Pool Coverage

The Surfer S2 is genuinely whisper-quiet — you can barely hear it as it glides across the water. Thanks to dual optical DTOF sensors, it detects walls, ladders, and pool edges, slows before impact, changes direction intelligently, and maps and optimises its cleaning paths. In time-lapse testing (20× speed), it covered the entire pool rapidly, hitting every zone with near-perfect consistency.

Stronger Suction & Larger Filtration

Underneath, the S2 has two brushless propeller motors and a 22.7cm suction inlet, allowing it to pull in large leaves, insects, pollen, fine dust, and algae. The 4-litre debris basket is a massive upgrade from the S1 and slides out smoothly without backspill, while its 150-micron filter catches finer particles than most pool skimmers on the market.

Edge Cleaning Mode

The S2 automatically alternates between wide pool coverage and a 10-minute edge cleaning mode to scoop debris that floats along the perimeter — an issue many pool owners constantly battle.

Built-In Chlorine Dispenser

A genuinely clever addition: the S2 includes an integrated chlorine dispenser for standard 3-inch tablets. It releases chlorine gradually while cleaning, keeping water balanced and saving owners yet another manual task.

Anti-Stranding Design

With four adjustable columns underneath, the S2 avoids getting stuck on ledges, steps, tanning shelves, or shallow entries. Testing confirmed it never once got trapped in our Gold Coast pool, which has multiple tricky edges.

05Who Should Buy the Aiper Surfer S2?

The Surfer S2 is perfect for pool owners who have leafy environments, coastal dust, pollen, or insects; don't want to manually skim their pool every morning; prefer a fully automated, solar-powered system; want quiet operation and remote app control; or already own a robotic pool cleaner like the Aiper Scuba X1. Paired with a floor-and-wall robot like the Scuba X1, you essentially get a fully automated, full-pool cleaning system — the skimmer handles the surface while the robot handles everything below.

06Aiper Surfer S2 vs Surfer S1 — What's New?

The result? A dramatically improved cleaner that works longer, smarter, and more independently.

07Where to Buy + Giveaway

Thanks for reading our in-depth review of the Aiper Surfer S2 — and don't forget to subscribe on YouTube and enter the giveaway!

Affiliate Disclosure: This article may contain affiliate links. As an Amazon Associate, we earn from qualifying purchases at no additional cost to you.